Subaru Impreza STi 08 SD+Flat foot shift+LC AZ1G202G

Product Information

Speed Density

The purpose of this feature is to overcome MAF setup limitations. A volumetric efficiency map is used for calculating airflow, MAF scaling table is NOT needed

Flat foot shifting

The purpose of this feature is to allow you to hold the throttle fully open while shifting gears.

The FFS limiter is enabled when the vehicle speed is above the LC speed threshold and the clutch pedal is depressed.

What benefits can you expect from using FFS?

1. Reduced stress on the transmission when used properly
2. Boost will not drop between shifts as the throttle remains wide open

Launch control

The purpose of this feature is to allow you to hold your foot planted to the throttle while stationary and forcing an RPM delta (offset to real rev limit) that allows the car to hold a user desired rev limit and launch with as much less wheelspin as possible when releasing the clutch.

This patch is applicable only to a ROM image downloaded from a EDM Subaru Impreza STi with calibration id AZ1G202G. The patch will add the following features/enhancements (only one can be active at a time):

• Flat foot shift
• Launch control
• Valet rev limit
• Stationary rev limit

Installation instructions

Price: $150.00